1. Does the Adjustable Putter conform to the USGA guidelines?
2. Will the Adjustable Putter insert work with standard putters?
3. What is required to install the insert into my existing shaft?
4. What if I want to purchase larger quantities for my company?
5. Can the Adjustable Putter be ordered in a custom or special length?
6. Can I send in my putter head and have it added to an adjustable putter shaft?
7. How does the insert locking key work, and what if I have to replace the key?
8. What grips are available and are they high quality?
9. What is your return policy?

1. Does the Adjustable Putter conform to the USGA guidelines?
When installed using the exact directions and your putter head itself conforms. The USGA is very strict that assembly must be exact.  Please read the Rules of Golf (rule 2003-001). If you don't tighten down the locking mechanism allowing the handle to easily be altered will result in the putter being non conforming until tightened. (Back to Top)


2. Will the Adjustable Putter insert work with standard putters?
At this time our inserts are designed for .625 ID shafts.  The recommended shaft is the True Temper ski pole straight or double bend. (Back to Top)


3. What is required to install the insert into my existing shaft?
First you need to decide what basic length you want.   The average length driver is 45 inches.  If you wanted 45 as the shortest setting you would cut your shaft at 38 inches.  After applying the insert you would have 45 to 52 inches for an adjustable putter.  Because people will want different lengths our unit of measure is 1 thru 7 on the inner shaft.  Therefore you might play at 31/4 for fast greens and 53/4 for slow, you get to decide. Basically you will cut your shaft, install the lower grip, sleeve the insert and add bonding agent included, and allow time to set up.  (Back to Top)


4. What if I want to purchase larger quantities for my company?
Please contact us directly. (Back to Top)


5. Can the Adjustable Putter be ordered in a custom or special length?
Yes, contact us directly. (Back to Top)


6. Can I send in my putter head and have it added to an adjustable putter shaft?
Yes, assuming your putter is designed for either a straight or double bend shaft.
Please contact us directly. (Back to Top)


7. How does the insert locking key work, and what if I have to replace the key?
That's easy, it's just an allen wrench, 5/64ths. (Back to Top)


8. What grips are available and are they high quality?
We use the best quality possible from the type metal used to the type
heli-coils used.  The grips are Winn Grips for long putters. (Back to Top)


9. What is your return policy?
A $25 restocking fee for clubs returned in new condition, no returns for used clubs. (Back to Top)